I’ve spent years testing portable heaters—from classic resistance models to oil radiators and PTC ceramics—because I work long hours in a cold office and often record videos at night, when the temperature drop is most noticeable.
Over the last two weeks I’ve used Qinux ClimaWarm Q as the only heat source in my office (12 m²) and as a booster in a bedroom and a small living room. I’ve run it at dawn on cold mornings, during long work sessions, and on a couple of nights with the windows cracked open for ventilation. Here’s my real-world experience, calmly explained—and with numbers.
What is it, and who is it for?
ClimaWarm Q is a PTC ceramic heater with two power levels (500 W and 1200 W), a thermostat, timer (30/60/90 min), touch controls, LCD screen, remote control, and a multi-protection safety system that cuts power if it tips over or overheats. The promise is straightforward: fast, quiet, low-consumption heat for small and medium rooms—no installation and no need to fire up central heating.
If you work from home, share a flat and don’t want to pay for the whole boiler, live in a damp area where the cold “creeps in,” or want a heater for the bedroom without lights or noise, this product is aimed at you.
Design and build
The form factor of the Qinux ClimaWarm Q surprised me: 118 × 118 × 325 mm. It’s tall and slender—more of a mini tower than a chunky resistor block. It’s stable, barely takes up floor space, and the flame-retardant ABS finish gives the peace of mind you want from a heating appliance. The grilles are designed to let air flow without turbulence, and the top houses the display and touch controls. The remote works at about 10 meters without pixel-perfect aiming; for bed or desk use, it’s spot-on.
PTC tech in plain English
PTC (Positive Temperature Coefficient) heaters use self-regulating ceramic plates: they reach working temperature very quickly and, once the room warms up, they draw less power to maintain. In everyday terms, that feels like “useful heat from the first minute” and fewer consumption spikes. There’s no red glow, no exposed coils, and none of that burnt-dust smell typical of open-element heaters. A fan assists the whole system to spread air in a wide angle, evenly.
Setup and controls
The Qinux ClimaWarm Q is very easy to use: plug in, power on, pick power/temperature, and optionally set a timer. I fine-tuned it via target temperature (to boost hard then maintain) and, at night, by duration (30 to 90 minutes) so I could fall asleep with the room already cozy. I like that it emits no visible light; the screen dims and doesn’t disturb.
Test methodology
- Spaces: 12 m² office (door closed), 10 m² bedroom, and 16 m² small living room.
- Routine: 25–40 min sessions at 1200 W to heat up fast, then occasional maintenance at 500 W.
- Measurements: room thermometer (rise and stabilization), basic desk sound meter (noise), and power consumption via plug-in energy meter.
- Typical conditions: from 16–17 °C up to a comfortable 20–22 °C.
Thermal performance: does it “really” heat?
In the 12 m² office, I went from 16.8 °C to 20.6 °C in about 14–16 minutes using the 1200 W mode. It’s not a “scorching jet” right in front of the unit; it’s wrap-around heat that carries well beyond a meter. You can leave it in a corner—no need to keep it at your feet. In the bedroom the result was even better: 15–20 minutes to cross into comfort with the door closed.
In the 16 m² living room it works nicely as a supplement (it takes the chill off and makes watching a show pleasant) but it won’t replace fixed heating if you expect to hold 22–23 °C with drafts or open windows. That’s consistent with its size and power.
Noise and day-to-day feel
Qinux ClimaWarm Q is quiet. It doesn’t “hiss” like some wire-coil fans and doesn’t develop odd vibrations over time. For remote work with an open mic and for sleeping, it fades into the background. The airflow is steady and doesn’t overdry the room; there are no blasts of hot air followed by long pauses—the pattern that usually bothers people.
Safety and peace of mind
Tip the unit and it shuts off. Partially cover it to provoke abnormal temperature and it cuts out. Two simple tests, but essential if you have kids or pets. It’s also reassuring that if the unit ever enters overheat protection, the recommended cycle is: blow cool air, power down, and rest for 10 minutes before resuming. That extends the device’s lifespan and prevents scares.
Price and Special Offers
Looking for fast, efficient heat without turning on the whole home system? The Qinux ClimaWarm Q launches with a 50% introductory discount. Thanks to this offer, you can get it for €79 instead of €158 .
The promotion is time-limited and subject to stock. If you want a quiet, safe PTC ceramic heater with a remote for small and medium rooms, this is a great chance to prepare your home before the real cold hits.
Activate the 50% discount via this link
How to buy
- Check availability on the official website via this link.
- Choose the quantity of Qinux ClimaWarm Q (bundle packs for several rooms lower the price per unit).
- Enter your details for shipping and payment to complete a secure purchase.
- Enjoy the offer for a limited time and get your ceramic heater delivered.
- Note: Free shipping from €95. Double or triple packs are often the best value if you want to cover both office and bedroom.
Purchase Guarantee
For peace of mind, Qinux ClimaWarm Q includes a 30-day satisfaction guarantee. If it doesn’t meet your expectations, you can request a refund easily. The unit also features safety protections (tip-over and overheat) that stop operation automatically in abnormal situations—extra confidence for daily use, even with kids or pets at home.
What other users say
With 1,300+ verified reviews and an average TrustScore of 4.7/5, Qinux ClimaWarm Q has become the go-to option for those seeking fast heat, low consumption, and silence in 8–14 m² rooms. Remote workers, families with chilly bedrooms, and people in damp climates highlight its response in minutes, temperature/timer controls, and the reassurance of its safety system.
Mark Carter ★★★★☆ (4.6/5)
“I work early hours in a small office, and with ClimaWarm Q I go from 17 to 21 in about fifteen minutes. I forget about the central boiler, and by week’s end the cost is just cents per session. Truly quiet.”
Laura Bennett ★★★★☆ (4.7/5)
“I use it in the bedroom. I set 60 minutes while I fall asleep and that’s it. The screen dims and doesn’t bother me. Zero burnt smell—which I hated with my old heaters.”
Sergio Parker ★★★★☆ (4.8/5)
“The mini-tower format surprised me. Stable, tiny footprint, and the remote is super handy. I boost at 1200 W and then hold at 500 W so my bill doesn’t spike.”
Martha Sanders ★★★★★ (4.9/5)
“I live in a very damp area and the cold seeped into the house. With ClimaWarm Q I can air out a bit at night and the room still gets cozy fast. I really appreciate that it shuts off instantly if it tips.”
Take advantage of the promo and kit out your office, bedroom, or studio with Qinux ClimaWarm Q to enjoy instant comfort without installations or runaway consumption.
Energy use and your bill: clear numbers
This is where a well-tuned PTC ceramic makes the difference. With a plug-in meter:
- 1200 W mode: quick 20-minute blast to raise the room, then off/standby or switch to 500 W.
- 500 W mode: gentle maintenance without “spikes.”
For an easy reference using an electricity price of €0.20/kWh:
- 1 hour at 1200 W uses 1.2 kWh ≈ €0.24.
- 3 hours at 500 W use 1.5 kWh ≈ €0.30.
A typical office use (boost 15–20 min at 1200 W, then occasional 500 W maintenance) comes to just cents per session. In my case—working early and again at night—I finished the week under €2 extra, with a much more livable home.
Where it shines (and where it doesn’t)
- Shines in 8–14 m² rooms: office, bedroom, kids’ room, studio, large bathroom. It’s plug & play, heats fast, and doesn’t intrude.
- Works as a helper in 15–20 m² living rooms if you close doors and avoid drafts. It removes the chill and keeps reasonable comfort while you watch a movie or work, but it’s not an industrial heater.
- Not its turf for heating very large or open spaces (open-plan lounge + kitchen, 4 m ceilings) or outdoors: you’ll need either more continuous power or a fixed solution.
Remote, timer, everyday life
The remote is what you’ll use all the time: bump the power, set 30/60/90 min, and forget it. For naps, falling asleep comfortably, or morning routines before a shower, that timing is gold because it prevents slip-ups. Startup is instant and the display is easy to read day and night.
Maintenance and care
No odd filters or delicate parts: wipe the grilles, keep a clear 20–30 cm around it so it can breathe, and don’t cover the unit with clothing (obvious, but worth stating). If you notice a dusty smell the first couple of times, it fades quickly; that’s normal for any brand-new heater.
Activate the 50% discount via this link
Frequently Asked Questions (FAQ)
What room size does Qinux ClimaWarm Q work best in?
It’s optimized for 8–14 m² (offices, bedrooms, nursery, studio). In 15–20 m² it works as a supplement, taking the chill off if doors are closed and there are no drafts. For very large or open spaces, consider a fixed solution or more continuous power.
How long until you feel the heat?
In a typical 12 m² room, getting from ~17 to ~21 can take around 14–16 minutes using 1200 W mode. PTC tech delivers useful heat from minute one and stabilizes without sharp spikes.
Is it noisy? Will it bother sleep or recording?
It’s quiet, and the airflow is steady—no hissing, no odd vibrations. The screen dims so it won’t disturb at night. Perfectly fine for open-mic remote work and for sleeping.
4) Does it use much power? How do I estimate session cost?
Quick example at €0.20/kWh:
- 1 hour at 1200 W → 1.2 kWh ≈ €0.24.
- 3 hours at 500 W → 1.5 kWh ≈ €0.30.
Typical use: 15–20 min at 1200 W to raise the temp, then 500 W maintenance as needed. Bottom line: cents per session.
What’s the difference between a ceramic PTC and a “classic” resistance heater?
PTC units self-regulate: they heat up quickly and, on reaching temperature, reduce draw to maintain. No red-hot coils or burnt-dust smell from exposed elements. Day to day they’re more efficient, stable, and pleasant.
Does it oscillate?
This model does not include oscillation. It compensates with a wide diffusion angle that distributes air evenly. Place it in a clear corner and it covers the recommended volume well.
How do you control temperature and time?
You get touch controls, an LCD screen, and a remote control (about 10 m reach). Choose power (500/1200 W), target temperature, and timer at 30/60/90 min.
Activate the 50% discount via this link
Is it safe around children or pets?
Yes. It has tip-over protection and overheat cutoff. If it detects an abnormal condition, it expels air, powers down, and recommends a 10-minute rest before resuming. Still, keep 20–30 cm clear around it and don’t cover it with clothes.
What maintenance does it need?
Practically none: an occasional dry cloth over the grilles. Avoid dust build-up, don’t block the inlets/outlets, and don’t run it covered. If there’s a faint smell the first uses, it disappears after a couple of sessions (normal with new devices).
Can I air out the room while it runs?
Yes, but note that with windows slightly open the unit compensates for incoming cold air. In small rooms it will still warm quickly; in larger spaces, it’s better to close doors to maintain comfort.
Can it be the main heat source for the living room?
In 16–20 m² living rooms it works as a supplement (ideal for watching a show or working without feeling cold). If you want a steady 22–23 °C in larger or drafty spaces, you’ll need more power or a fixed solution.
What does the guarantee and return process include?
You have a 30-day satisfaction guarantee. If it’s not for you, you can request a refund easily via the official website. Keep the packaging and follow the manufacturer’s instructions to speed things up.
Verdict
Qinux ClimaWarm Q isn’t trying to be your whole-house boiler; it plays a different game—and wins. In small/medium rooms it delivers useful heat in minutes, with no lights or buzzing, solid safety, and very modest consumption. The mix of 1200 W for the “push” and 500 W to maintain is exactly what you want from a modern space heater. Room to improve? Sure: oscillation and a slightly longer cord would be great. But where it counts—heating fast while sipping power—it scores high.
Recommended if you want instant comfort without complicating your life.
If you’re getting the house winter-ready, my advice is simple: start with the room where you spend the most time and let Qinux ClimaWarm Q do its thing. You’ll remember it every cold morning—in the best way.
